Hackintosh Your Intel PC

Hackintosh Your Intel PC

Well I was tweaking from about last few weeks to figure out, how to install the MAC OSX in my laptop..

After reading a lot of guides and posts I got a idea and now I am using OSX  in My Laptop..

IMP : Please google your Processer and check weather it is possible to Hackintosh your PC

Before You Start :

-Backup your personal data

-Check your BIOS settings >>
Execute Disable bit: Enabled
XD: Enabled
Limit CPUID Max: Disabled
Virtualization: Disabled or Enabled, try it.
Hyper-threading: Disabled or Enabled, try it.
HPET: Enabled
SATA Mode: AHCI

-A target partition (primary partition for MBR) or disk will be needed for installation. If you are not an advanced user, then use a clean harddisk with no personal data/OS as for target and unplug all the other harddisk drives connected to your motherboard just to be safe.

-If the target disk includes personal data and/or any OS, we advice Parted Magic Live CD for partitioning and such operations for preparing a target. You can also do the partitioning and create targets by using OS X Disk Utility.

GUIDE :

1)      Download the iAtkos l2.dmg from the torrent and Burn it into DVD using Transmac

2)      Create a Drive partition in windows of minimum 20gb

3)      Insert your disc in your CD-Rom and restart

4)      Boot Via CD-ROM

5)      Run Disk Utility via Utilities menu and erase the target for clean install (Here you select the drive which you created in Windows) and before erasing change extension from NTFS to MAC JOURNALED

6)    Select the destination for installation

7)    Click Customize* and select Chameleon ,FAKESMC,DISABLER,RTC ,USB 3 , PS2 ,LAPTOP Battery ,Realteck network card (I have selected laptop battery as I am using a Laptop )

8)    Click Install

9)      After installation, it will prompt for restart, and automatically restarts (Do not take out the DVD)

10)   Now move cursor to the Lion Drive (not the DVD & do not press enter), type –s and press enter (otherwise it will hang)

11)   This will load in single user mode. Wait till the loading has stopped. Last word should be *root*:

12)   Now type the commands that were shown on the screen

13)    

14)   /sbin/fsck –fy

15)    

16)   Wait for the process to finish, till the “root:” shows up again. Now type

17)   /sbin/mount –uw /

18)    

19)   Again wait till “root:” appears. Now you have to remove AppleIntelSNBGraphicsFB.kext and AppleIntelSNBVA.bundle. To do this, type the following commands:

20)   sudo rm –R /System/Library/Extensions/AppleIntelSNBGraphicsFB.kext

21)   sudo rm –R /System/Library/Extensions/AppleIntelSNBVA.bundle

22)   exit

23)                          

24)   Now Mac should load automatically showing World map for selecting Country. Personalize by filling up the country, time date language, User name, etc. etc.

25)   After the Mac Desktop has loaded, insert Thumb drive with MultiBeast and smbios.plist. Copy both of them to the desktop.

26)   Replace the smbios.plist file in the /System/Extras/ folder with the one on the desktop.

27)   Open MutiBeast and run it. Options that are to be marked in the MultiBeast are:

28)   + EasyBeast (required)

29)   + System utilities (required)

30)   -  Drivers & bootloader

31)                   - Kexts & Enablers

32)                                   - Network

33)                                          - Lnx2Mac’s Realtek RTL81xx Ethernet (required)    

34)   Restart (Do not remove the DVD)

35)   Again select Lion drive and press enter (-s mode not required). Now Mac should load without any hanging problem.

36)   Eject the DVD from disk drive. And Restart.

EnjoY!!!